Safety Monitoring Solutions
Edgefinity IoT is a system that gives you the tools to optimally detect and handle almost any accident or incident you may be challenged with whether it is a geo-fence violation, a workplace accident, panic button press or enforcing minimum staffing requirements.
Safety Monitoring Solutions
Using an RFID tracking system for personnel safety monitoring provides high visibility across your facilities.
REQUEST DEMO
- Employee: Bobby Park
- Location: Receiving Area
- Status: Panic Button Pressed
- Employee: Patty Lewis
- Location: Shipping Area
- Status: Safe
- Employee: Philip Bear
- Location: Shipping Area B
- Status: Safe
- Employee: Steve McGrew
- Location: Storage Area A
- Status: Safe
- Employee: Linda Green
- Location: Automated Storage
- Status: Safe
Overview: Keeping Employees Safe with RFID
Edgefinity IoT addresses the complex safety and security needs of facilities ranging from typical office buildings to critical infrastructure. It is a fully scalable software/hardware solution. Combining active RFID hardware and software with RTLS, UWB, and other capabilities, Edgefinity IoT gives stakeholders the assurance of health, safety and secure monitoring of staff even in lone worker situations.
Edgefinity IoT keeps workers and first responders in the know by sending out instant alerts whenever an incident occurs. No matter where managers are, they can always have a live, real-time view of any active alert situation from inception through resolution.
Use Cases
The versatility of RFID allows for a wide array of use cases from asset tracking to lone working safety monitoring.
Worker Location Tracking
Track the real-time location of workers to ensure they are in safe zones and away from hazardous areas.
Emergency Evacuations
Quickly account for all personnel during emergencies and ensure everyone is safely evacuated.
Hazardous Area Monitoring
Restrict access to dangerous areas and immediately alert supervisors if unauthorized personnel enter these zones.
Emergency Response
Quickly locate and respond to security or safety incidents as they happen in real time.
Remote Location Monitoring
Track personnel working in remote or offshore locations to ensure their safety and rapid response in case of emergencies.
Equipment Monitoring
Track the usage and maintenance of safety equipment like gas masks and self-rescue devices.
Compliance and Audits
Maintain records of personnel movements and safety compliance for regulatory audits.
Hardware
The versatility of RFID allows for a wide array of use cases from asset tracking to lone working safety monitoring. To deploy effective safety monitoring solutions, we use the following hardware applications for our RFID projects:
- 5RFID Tags
- 5ID Tags for Personnel
- 5RFID Readers
- 5Antennas
ID Tags Supplied by Sewio Networks
Enhanced Worker Safety with Panic Buttons
With Edgefinity IoT all employee badges contain a panic button. This feature can let you know of any events happening in Real Time throughout your facility. Once the button is pressed an alert will go off, this can trigger an onscreen popup in security, text message email, siren or any IP addressable device to investigate the situation.
Employee’s can hit the panic button in case of a health emergency or environmental incident in the facility.
Lone Worker Safety Tracking
Edgefinity IoT provides lone worker safety solutions for companies and enterprises. Our technology gives you an eagle eye view of your facilities and employees. Improve your enterprise’s safety initiatives with Edgefinity IoT.
System Capabilities
Edgefinity IoT allows users to maintain and improve their safety protocols without extensive customization or programming. CYBRA’s safety monitoring solutions provide the following tools and capabilities.
Enforce Minimum Staffing Requirements
You can finally enforce minimum staffing requirements for your facility. These are also time dependent as during the day you may have a minimum staffing of 2 people in the security room while during the evening you may only need one.
It is also very flexible while the minimum staffing maybe 2 people but you allow for 10-minute breaks of one of the employees so if an employee leaves it starts a timer and will only alert when the minimum staffing is under 2 for greater than 10 minutes but if both employees leave this would generate an immediate alert.
Real Time Location Tracking
Edgefinity IoT can track the real time position of all employees in the facility and trigger rules around them. The location of employees can be hidden and only used to trigger rules or only show up in emergency situations.
Personnel Safety Monitoring FAQs
Can You Enforce a Maximum Amount of Employees in a Certain Area?
Yes, with Edgefinity IoT we can set a maximum number of employees/visitors/contractors in certain areas.
Do These Badges Track Employees Outside of the Facility?
No, they send all of their information to the anchors located in your facility once they leave it is not possible to track them.
Can the Panic Button be Used for Other Purposes?
Yes, we typically use the panic button for emergencies however some facilities use it for other purposes, within Edgefinity IoT you can customize your rules and have the panic button send out any type of information you need.
How Long Do the Batteries Last and How Do We Recharge Them?
This depends on what features the badges have and how often the transmit location. The badges can last anywhere between 3 months and 1 year and they are easily charged via wireless charging, just set the tag on a charger and it charges.
Additional Resources
How RFID Works with FEFO (First Expired First Out)
For organizations in food and beverage manufacturing, food waste in their supply chains is incredibly costly. According to a report by McKinsey & Company, estimated $600 billion worth of food is lost globally during or just after harvest. For these organizations,...
How to Replace Loftware Print Server
If you’re looking for a more cost-effective cloud printing solution, or to keep your software on-premise, CYBRA can help.Loftware recently announced plans to retire Loftware Print Server (LPS). Support for LPS officially ends on December 31, 2024. Read the official...
Request a Demo
Contact an RFID expert today to see how our safety monitoring solutions can improve your organizational operations.